Public
- Public
- Network
- Groups
- Popular
- People

The Cytron CM4 Maker Board with HDMI, USB, and power connected, as well as an NVME drive installed. Where normally the CM4 would be, there is now a biblically accurate board in the form-factor of CM4, but covered in flex cable connectors, on top of it stands an RPi 5 attached using custom 3d-printed standoffs, and all the flex cables go from the "CM5" to the various connectors on the RPi5, it's almost NSFW, in Japan this would definitely be censored.

Download link

The Cytron CM4 Maker Board with HDMI, USB, and power connected, as well as an NVME drive installed. Where normally the CM4 would be, there is now a biblically accurate board in the form-factor of CM4, but covered in flex cable connectors, on top of it stands an RPi 5 attached using custom 3d-printed standoffs, and all the flex cables go from the "CM5" to the various connectors on the RPi5, it's almost NSFW, in Japan this would definitely be censored.
https://files.mastodon.social/media_attachments/files/111/364/554/587/917/831/original/b5e776c73a1458bf.jpg

Notices where this attachment appears

arturo182 ✅ (arturo182@mastodon.social)'s status on Tuesday, 07-Nov-2023 01:45:02 JST arturo182 ✅

The @Raspberry_Pi 5 has been available for 2 weeks now, and still no CM5? Sorry, this will not stand, time for me to take matters into my own hands!
Introducing, the (not really) CM5! The power of RPi 5 in the CM4 form-factor.
Here seen used with the Cytron CM4 Maker Board.

In conversation about a year ago from mastodon.social permalink