Notices by ruff@social.librem.one

@mntmn that's indication of timing/race

@mntmn I think imx only provides mac phy but radio on the soc is marvell
https://wireless.wiki.kernel.org/en/users/Drivers/mwifiex

@mntmn
[ 14.136136] btmrvl_sdio mmc1:0001:2: sdio device tree data not available
[ 14.378465] mwifiex_sdio mmc1:0001:1: WLAN is not the winner! Skip FW dnld
[ 14.766218] mwifiex_sdio mmc1:0001:1: WLAN FW is active
[ 14.829237] mwifiex_sdio mmc1:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p197)
[ 14.837651] mwifiex_sdio mmc1:0001:1: driver_version = mwifiex 1.0 (16.68.1.p197)

The box has both marvell and atheros, can say that atheros has better reception but marvell also ok

@mntmn Other than that - I have Marvell SDIO card but that has both BT and WIFI on SDIO

@mntmn I meant mpcie of course. Ok got it, means BT should be uart or sdio bcz there's no USB bus on MB. I think ralink rt3290 which I tried first on reform was with BT-over-pci, but I didn't like it and replaced with intel. That has bt on usb but I don't use bt much on reform.

@mntmn why not pci-e?

@de @mntmn is it worth it?

@mntmn And how it behaves without? I mean is it just adding external noise filtering (eg you shouldn't worry about proper internal wiring) or internal (without it the screen is always unstable)?

@mntmn btw will there be barebone version of pocket available? eg. if i buy A311D and thus will have iMX8 available. Or just to buy a pocket with A311 and swap them then

@mntmn mb better something in soho form factor? eg. MB from reform mini, removable battery block as UPS-addon, expansion board instead of KB/LCD with various pcie, m2, sdio, usb and sata slots exposed, replacable/printable mounts for antennae, sdd-drives, ethernet cards/sfps, etc

@mntmn white balance is broken it seems. need to add more blue and red.